Rotary Extreme RX7 Build Day 35 Second Stab Seat Repair
Day 35 Second stab at the seat repair – I’m going to leave it alone because I’m at my limit as far as leather repair skills go. I used a bent razor blade and…
Author: Rotary Extreme
Rotary Extreme RX7 Build Day 34 Seat Repair
Day 34 I have been wanting to try and patch this tear in my seat and Im super happy with the results. The product is amazing quality and you can see with a more…
Rotary Extreme RX7 Build Day 32 Lower Control Arms
Day 32 What can I say….Eagle One mag and wheel cleaner is the shizzz I wanted to clean the rear upper and lower control arms before putting in the new pillow ball bushings. I…
Rotary Extreme RX7 Build Day 31 Thread Locker
Day 31 Ok – I got the blue thread locker that’s meant to be removable, and of course its in a red tube. I mean really…whats up with that ?!?!?!? Maybe its a sneaky…
Rotary Extreme RX7 Build Day 30 Clutch Saga
Day 30 Update on the clutch saga, it was a design change from California Clutch however if you want the original design you will have to call and specify it. I spoke with California…
Rotary Extreme RX7 Build Day 29 Pilot Bearing
Day 29 I wanted to install the clutch and pressure plate today but I ran into some issues. Pilot Bearing was seized inside – I could not get it out for the life of…
Rotary Extreme RX7 Build Day 28 Sensors
Day 28 Banzai Racing stuff is so cool. The oil pedestal is dope !! Parts that came in: Banzai stuff (oil pedestal, viton 1 way check valves, more belts). Misc 6AN to 5/16 barb…
Rotary Extreme RX7 Build Day 27 Guardian Angel
My Guardian Angel was watching over me today !!!!!!!!!!!! Day 27 Lets start with the very very very bad and then end with the good. While I was installing the belts I wanted to…
Rotary Extreme RX7 Build Day 26 Fuel Spacers
Day 26 Maannn. So all in all, I was just really missing the primary fuel rail spacer, still good thing it was missing because it prompted me to do some further investigation. I looked…
Rotary Extreme RX7 Build Day 25.5 Rail Thoughts
soo…uhhhhh While looking for my fuel fittings online I noticed that there is a plastic fuel spacer under the primary fuel rail. Now I know why there was some resistance. I did not have…