Rotary Extreme RX7 Build Day 18 Test Fit Turbos
Day 18 A whole lotta test fitting – with a hammer I remembered that there were fitment issues with the twin turbo oil and water pipes. I vaguely remember someone saying that one of…
Category: Rotary Extreme RX7
Rotary Extreme RX7 Build Day 17 Manifold and Paint
Day 17 Painted both turbo CHRA’s and the main exhaust manifold VHT header black with satin black 2000f paint. I painted my first glitter pieces – the turbo compressor housings. I finally finished re-painting…
Rotary Extreme RX7 Build Day 15 BOUSOZOKU
Day 15 so – in my quest to be BOUSOZOKU Im going to paint all the aluminum parts with a glitter look. VHT cast aluminum, coated with glitter then sealed with VHT gloss coat…
Rotary Extreme RX7 Build Day 14 Wastegate Port
Day 14 I cleaned the turbo actuators, sanded out some scratches on the pri turbo wastegate actuator (picture shown is not finished with sanding), used the eagle one again to remove some corrosion. It…
Rotary Extreme RX7 Build Day 13 Aluminum
Day 13 – Greeaaattt Succeessssss !!!!!! So I read the Eagle One mag and wheel cleaner cleans aluminum well. I was praying that it would work and it did, so well that it also…
Rotary Extreme RX7 Visual
quick visual I had the AB-Flug GTM body kit on my rx7 back in 2000, I went to sevenstock 4 with it. (I think the rims were Volk GTN’s) I have 3 pics showing…
Rotary Extreme RX7 Build Day 12 Prep Problems
Day 12 – a complete disaster !!!! I found the green paint for my engine, cleaned up turbo exhaust shields. I made a mix of some cleaners and it turned the aluminum black Luckily…
Rotary Extreme RX7 Build Day 11 Turbo Inspection
Day 11 I took apart the 99 twins for inspection and cleaning and to port the primary wastegate. The stock wastegate measured roughly 26mm (1.023 inch). Ive read to port it to 31.75mm (1.25inch)….
Rotary Extreme RX7 Build Day 10 Paint Day!
Day 10 I cleaned up the engine and taped it ready for paint. Made a little paint booth. Who knew my little dust mask would be worth millions. I used dupli color engine enamel…